Firmware change: 1. Powertone renamed to "LowBat Tone". May be activated ("On") and deactivated ("Off"). 2. If TX-group is set to a certain ID and RX-Group is set to "none" the radio will now still receive the TX-group that has been set. 3. Access policy is set to color code,...

Xiegu X5105 Firmware V3.0 1. Easier operation with new VOX function.2. Fixes CW issue.3. Properly optimized hardware greatly reduces the problem rate.　 CLICK HERE to download.

CPS&Firmware 1.02 Firmware changes： 1. Solve the problem that the scanning speed is too slow in the digital mode. Compared with the previous two firmware versions, the scanning speed is faster. 2. Solve the problem that the Admit Policy is set to color code, which is different from the logic...

Firmware V1.3.0 Fix the wrong voice prompt when the channel is set different TX & RX frequencies. 　 CLICK HERE to download

CPS&Firmware 1.01 Firmware changes: 1. When the channel number of the zone is greater than the number of channels in the next zone, the switching zone will jump back to channel 1 at this time. If there is less than or equal to, it will jump back to the same...

We've released a NOAA weather license-free radio (FRS & PMR446), which is with dual display and dual watch function, Radioddity FS-TI / PR-T1. Radioddity T1 comes with the function of automatically scanning through 10 available weather (WX) band channels and locking onto the strongest weather channel to alert you of...

Since the UV-5R series share the same manufacture programming software and CHIRP support most of Baofeng UV-5R models, this programming guidance is a helpful preference to the following model： Baofeng GT-3, BF-F8/BF-F8+, BF-F9, UV-5R+/UV-5R+Plus, UV-5RA/UV-5RA+/UV-5RAX+, UV-5RAX (2M/1.25M), UV-5RE/UV-5RE Plus, etc.   Preparation before Programming 　 1. Computer System Requirements Operating...

Firmware V3.2.1 & Software V3.1.1 1. Lock frequency range to meet FCC rules 2. Solved GD-77 (INVERTED DISPLAY VERSION) screen flashing when turned on Note: Two ways to unlock frequency range I. Press "SK1" + "7" key to turn on the radio - Press "Menu" to restart II. Downgrade to...